Transplanter is composed of independent planting single group, each single group is driven by its ground wheel, so it can be used together with tractors of different sizes to form a 2-6 row transplanter, with the characteristics of building blocks.

Rotary cup feeder

The transplanter USES a rotary cup feeder. The feeder consists of several feeding cups, the diameter of which corresponds to the size of the bowl. Below each feeding cup is a valve, which is controlled by a CAM mechanism to open and close the valve. When the feeding cup is turned to the top of the seedling tube, it opens and then closes the seedlings. Feeding cup before the close of the period, can be fed to seedlings, therefore prolong the artificial feeding seedling, the seedlings can be rapid continuous feeding, miao 60 ~ 70 plants per minute, this is the semi-automatic transplanting machine is faster in the world for blade frequency, because the frequency of the artificial seedlings is limited, for rotating cup type feeding device, its limit is 70 points, if more than the limit, the staff will feel nervous, leakage phenomenon.

Grating type lifter

Seedling from guide tube under the backward, and through the bars by put a lodged plant upright the formation of the channel, in the opener of seedlings in a ditch, the article put a lodged plant upright bar, under the support of the seedlings will not tilt in any direction, is in upright position, in the opener at the same time, the move from soil opener tail back first to seedling roots soil, forming a covering, at this time put a lodged plant upright bars also buried in the soil, at the same time in the machine forward movement, V will suppress wheel trench wall soil push down, forming a second turns the soil, and soil compaction, At this time, compared with the upward movement of the seedlings, the side continues to support the seedlings, so as to prevent the seedlings from being crushed or buried by the soil during the compaction process of the overburden. With the forward movement of the machinery and tools, the supporting bars gradually break away from the seedlings and complete the supporting task, and the seedling planting process also ends. The uprightness and stability of the planted seedling were greatly improved by adopting the gate - bar feeder.

Guide blade tube

The function of the tube is to transport the seedlings to the bottom of the ditch. Because the movement of seedlings in the guide tube is not mandatory, and different from the mandatory way of the clamp transplanter, so it is not easy to produce injury seedling phenomenon.